步骤一:
Step 1:
1设备应采用旁通式安装, 以便设备在不停机状态下检修与维护。
1 equipment should be installed by by-pass so that the equipment can be repaired and maintained without stopping.
步骤二:
Step two:
本设备壳根据现场情况采用水平或垂直安装。
This equipment shell is installed horizontally or vertically according to the situation.
步骤三:
Step three:
设备必须按进出水口方向与管道连接。
The equipment must be connected to the pipe in the direction of the inlet and outlet.
步骤四:
Step four:
当垂直安装时,设备进水口朝上。
When vertical installation, the water inlet of the equipment upwards.
步骤五:
Step five:
水平安装时,排污口朝下。
At the level of installation, the blowdown is down.